gear reduction motor

If the hardness of gear motor cannot conform to gear reduction motor the standard, use for a long time, or when used in the overload environment will accelerate hard tooth surface gear wear and tear, and thus affect the normal operation of the transmission device. In order to make the normal operation of equipment, to prevent unnecessary damage, can through the following way to solve the problem of wear and tear of equipment:
When a gear motor, gear shaft hole wear, but the plating method is adopted to restore the original precision to the parts.
Second, if the gear tooth broken damage dispersion machine, such as coating dispersion machine, laboratory dispersion machine, vacuum machine, can't repair, must rework the new parts.
Three gear motor, timely cleaning, practice may not replace any hardware facilities, do not add detergent, to ensure the safe operation of the gearbox.
Four, to choose a good model specifications, to ensure that the mechanical safety coefficient, strictly in accordance with the operational procedures to use, to bring its efficiency.
Geared motor in processing and manufacturing, wear and tear problems, we must solve the above several ways, if it cannot solve, we must find specialized technical personnel to solve.
Reducer bearing under the condition of normal installation and small geared motors lubrication maintenance, working can be used to the bearing surface caused by fatigue flake material, which can be used to the calculation of bearing life is terminated, sometimes can also more than design life many times.
And in the course of actual use, often due to premature damage of rolling bearing and scrap, bearing the premature failure can come from bad of bearing manufacturing defects and bearing material, but more is from improper use, maintenance and lubrication of the bearing etc. To find out the cause of the damage of bearing correctly to be difficult, a slightly damaged bearing from bearing uغير مجاز مي باشدe, especially bearing wear condition, wear track on the surface of the work and so on to analyze the cause of the damage.
Main gear reducer shaft brushless gear motor gear precision and movement accuracy, the smoothness of precision, accuracy of contact. Gear reducer gear hobbing machining with control the common normal length and jump to ensure the movement precision gear ring diameter, with control of tooth profile error and base pitch deviation to ensure accuracy of working stability, control gear to error to ensure that the contact accuracy.